What are the advantages of acrylic products?<\/strong><\/h2>\n\n\n\nIn general, when correctly applied within the appropriate system, acrylic products offer durability and speed of application\u2014qualities that make them ideal both for large construction sites and targeted interventions. They also provide a very wide range of solutions, each with a specific function: consolidating, levelling\/priming, protective, water-repellent; they can help inhibit mould growth, reduce dirt pick-up on surfaces, mitigate condensation, and even contribute to improved acoustic comfort and thermal insulation. In short, it\u2019s a diverse world.<\/p>\n\n\n\n
It is worth noting that similar performances can also be achieved with other product families\u2014such as mineral systems\u2014but in those cases the application cycles are different and more specific. Acrylic systems generally offer simpler application workflows.<\/p>\n\n\n\n
<\/p>\n\n\n\n![\"\"](\"https:\/\/www.vierodecoratives.com\/wp-content\/uploads\/2023\/08\/erametal-1-1024x576.jpg\")
Erametal<\/figcaption><\/figure>\n\n\n\nWhat is the difference between acrylic products and lime-based products?<\/strong><\/h2>\n\n\n\nAcrylic products <\/a>are, in a sense, the \u201cother side of the coin\u201d compared to traditional mineral products. One key difference concerns how they interact with the substrate. Mineral products, when used within a mineral system, chemically bond to a substrate with similar characteristics. A synthetic (acrylic) paint, by contrast, adheres to the substrate\u2014whatever it may be\u2014through mechanical adhesion rather than by fusing with it. It forms a film that does not become one with the substrate.<\/p>\n\n\n\nAs a rule of thumb, acrylics are used whenever the substrates are non-mineral. Typically, mineral or silicate paints are preferred on mineral substrates.<\/p>\n\n\n\n
Acrylic products also ensure stable colors, wash resistance, and faster application. Lime-based products<\/a>, on the other hand, are breathable and natural and\u2014from an aesthetic standpoint\u2014lend walls unique, non-standardised effects.<\/p>\n\n\n\nAcrylic vs. mineral: which is the better choice?<\/strong><\/h2>\n\n\n\nThere is no single answer. The choice always depends on the project, the substrates, performance requirements, and the desired aesthetic.<\/p>\n\n\n\n![\"krakkle](\"https:\/\/www.vierodecoratives.com\/wp-content\/uploads\/2021\/10\/krakkle-decorative-finish-viero-1024x683.jpg\")
Krakkle<\/figcaption><\/figure>\n\n\n\nWhich acrylic finishes are available in the Viero Decoratives range?<\/strong><\/h2>\n\n\n\nAmong Viero Decoratives<\/a>\u2019 acrylic-based finishes you\u2019ll find plasters, paints, enamels, and gypsum-based products. Examples include Allure<\/a>, E Brezza<\/a>, Erametal<\/a>, Ghibli<\/a>, Krakkle<\/a>, Lithos<\/a>, Silk<\/a>, Rusten Finish Nova<\/a>, Viero Vel<\/a>,<\/strong> and Vieroplast<\/a><\/strong>.<\/p>\n\n\n\nWhat decorative effects can be achieved?<\/strong><\/h2>\n\n\n\nAcrylic-based finishes enable decorators to create a multitude of creative\u2014and customisable\u2014solutions. With acrylics you can achieve smooth, velvety surfaces as well as more tactile, elaborate textures.<\/p>\n\n\n\n![\"rusten](\"https:\/\/www.vierodecoratives.com\/wp-content\/uploads\/2021\/10\/rusten-decorative-finish-viero-1024x683.jpg\")
Rusten Finish Nova<\/figcaption><\/figure>\n\n\n\nCan they be mixed?<\/strong><\/h2>\n\n\n\nAbsolutely. Certain acrylic products allow you to fully express your creativity. They can be used in different multi-layer systems or combined with other finishes. Consider Viero Decoratives\u2019 Rusten Ossidato<\/a><\/strong> effect, created by combining the acrylic-based products Rusten Finish<\/strong> and Lithos<\/strong>.<\/p>\n\n\n\nCan lime-based Viero Decoratives products be combined with acrylic products?<\/strong><\/h2>\n\n\n\nYes\u2014provided the technical data sheets are followed. For example, our \u201cSetae Lucensis<\/a>\u201d<\/strong> line within \u201cMade in Tuscany<\/a>\u201d<\/strong> is created by applying two products in sequence: Marmorin Satin<\/a><\/strong> (lime-based) and Silk<\/strong> (acrylic-based).<\/p>\n\n\n\nCan acrylic-based finishes be applied to any substrate?<\/strong><\/h2>\n\n\n\nAcrylic finishes adhere well to plaster, drywall, and skim coats. The substrate must be sound and properly prepared. In every case, always consult the technical data sheets, because there are many different product types for specific situations. It is important to read the information provided on the packaging.<\/p>\n\n\n\n![\"\"](\"https:\/\/www.vierodecoratives.com\/wp-content\/uploads\/2021\/11\/RETE_E-Brezza_2-1024x767.jpg\")
E Brezza<\/figcaption><\/figure>\n\n\n\nWhat color range is available?<\/strong><\/h2>\n\n\n\nAcrylic products can be formulated in highly saturated colors\u2014from absolute black to pure white\u2014covering the full spectrum in between. Acrylic-based finishes are available in many shades and can be customised, with options for saturated, luminous, or glossy results. One of their key characteristics is color stability<\/strong>.<\/p>\n\n\n\nInterested in acrylic wall products?<\/strong> Get in touch for more information.<\/h2>\n\n\n\n
What is the difference between acrylic products and lime-based products?<\/strong><\/h2>\n\n\n\nAcrylic products <\/a>are, in a sense, the \u201cother side of the coin\u201d compared to traditional mineral products. One key difference concerns how they interact with the substrate. Mineral products, when used within a mineral system, chemically bond to a substrate with similar characteristics. A synthetic (acrylic) paint, by contrast, adheres to the substrate\u2014whatever it may be\u2014through mechanical adhesion rather than by fusing with it. It forms a film that does not become one with the substrate.<\/p>\n\n\n\nAs a rule of thumb, acrylics are used whenever the substrates are non-mineral. Typically, mineral or silicate paints are preferred on mineral substrates.<\/p>\n\n\n\n
Acrylic products also ensure stable colors, wash resistance, and faster application. Lime-based products<\/a>, on the other hand, are breathable and natural and\u2014from an aesthetic standpoint\u2014lend walls unique, non-standardised effects.<\/p>\n\n\n\nAcrylic vs. mineral: which is the better choice?<\/strong><\/h2>\n\n\n\nThere is no single answer. The choice always depends on the project, the substrates, performance requirements, and the desired aesthetic.<\/p>\n\n\n\nKrakkle<\/figcaption><\/figure>\n\n\n\nWhich acrylic finishes are available in the Viero Decoratives range?<\/strong><\/h2>\n\n\n\nAmong Viero Decoratives<\/a>\u2019 acrylic-based finishes you\u2019ll find plasters, paints, enamels, and gypsum-based products. Examples include Allure<\/a>, E Brezza<\/a>, Erametal<\/a>, Ghibli<\/a>, Krakkle<\/a>, Lithos<\/a>, Silk<\/a>, Rusten Finish Nova<\/a>, Viero Vel<\/a>,<\/strong> and Vieroplast<\/a><\/strong>.<\/p>\n\n\n\nWhat decorative effects can be achieved?<\/strong><\/h2>\n\n\n\nAcrylic-based finishes enable decorators to create a multitude of creative\u2014and customisable\u2014solutions. With acrylics you can achieve smooth, velvety surfaces as well as more tactile, elaborate textures.<\/p>\n\n\n\nRusten Finish Nova<\/figcaption><\/figure>\n\n\n\nCan they be mixed?<\/strong><\/h2>\n\n\n\nAbsolutely. Certain acrylic products allow you to fully express your creativity. They can be used in different multi-layer systems or combined with other finishes. Consider Viero Decoratives\u2019 Rusten Ossidato<\/a><\/strong> effect, created by combining the acrylic-based products Rusten Finish<\/strong> and Lithos<\/strong>.<\/p>\n\n\n\nCan lime-based Viero Decoratives products be combined with acrylic products?<\/strong><\/h2>\n\n\n\nYes\u2014provided the technical data sheets are followed. For example, our \u201cSetae Lucensis<\/a>\u201d<\/strong> line within \u201cMade in Tuscany<\/a>\u201d<\/strong> is created by applying two products in sequence: Marmorin Satin<\/a><\/strong> (lime-based) and Silk<\/strong> (acrylic-based).<\/p>\n\n\n\nCan acrylic-based finishes be applied to any substrate?<\/strong><\/h2>\n\n\n\nAcrylic finishes adhere well to plaster, drywall, and skim coats. The substrate must be sound and properly prepared. In every case, always consult the technical data sheets, because there are many different product types for specific situations. It is important to read the information provided on the packaging.<\/p>\n\n\n\nE Brezza<\/figcaption><\/figure>\n\n\n\nWhat color range is available?<\/strong><\/h2>\n\n\n\nAcrylic products can be formulated in highly saturated colors\u2014from absolute black to pure white\u2014covering the full spectrum in between. Acrylic-based finishes are available in many shades and can be customised, with options for saturated, luminous, or glossy results. One of their key characteristics is color stability<\/strong>.<\/p>\n\n\n\nInterested in acrylic wall products?<\/strong> Get in touch for more information.<\/h2>\n\n\n\n
As a rule of thumb, acrylics are used whenever the substrates are non-mineral. Typically, mineral or silicate paints are preferred on mineral substrates.<\/p>\n\n\n\n
Acrylic products also ensure stable colors, wash resistance, and faster application. Lime-based products<\/a>, on the other hand, are breathable and natural and\u2014from an aesthetic standpoint\u2014lend walls unique, non-standardised effects.<\/p>\n\n\n\n There is no single answer. The choice always depends on the project, the substrates, performance requirements, and the desired aesthetic.<\/p>\n\n\n\n Among Viero Decoratives<\/a>\u2019 acrylic-based finishes you\u2019ll find plasters, paints, enamels, and gypsum-based products. Examples include Allure<\/a>, E Brezza<\/a>, Erametal<\/a>, Ghibli<\/a>, Krakkle<\/a>, Lithos<\/a>, Silk<\/a>, Rusten Finish Nova<\/a>, Viero Vel<\/a>,<\/strong> and Vieroplast<\/a><\/strong>.<\/p>\n\n\n\n Acrylic-based finishes enable decorators to create a multitude of creative\u2014and customisable\u2014solutions. With acrylics you can achieve smooth, velvety surfaces as well as more tactile, elaborate textures.<\/p>\n\n\n\n Absolutely. Certain acrylic products allow you to fully express your creativity. They can be used in different multi-layer systems or combined with other finishes. Consider Viero Decoratives\u2019 Rusten Ossidato<\/a><\/strong> effect, created by combining the acrylic-based products Rusten Finish<\/strong> and Lithos<\/strong>.<\/p>\n\n\n\n Yes\u2014provided the technical data sheets are followed. For example, our \u201cSetae Lucensis<\/a>\u201d<\/strong> line within \u201cMade in Tuscany<\/a>\u201d<\/strong> is created by applying two products in sequence: Marmorin Satin<\/a><\/strong> (lime-based) and Silk<\/strong> (acrylic-based).<\/p>\n\n\n\n Acrylic finishes adhere well to plaster, drywall, and skim coats. The substrate must be sound and properly prepared. In every case, always consult the technical data sheets, because there are many different product types for specific situations. It is important to read the information provided on the packaging.<\/p>\n\n\n\n Acrylic products can be formulated in highly saturated colors\u2014from absolute black to pure white\u2014covering the full spectrum in between. Acrylic-based finishes are available in many shades and can be customised, with options for saturated, luminous, or glossy results. One of their key characteristics is color stability<\/strong>.<\/p>\n\n\n\nAcrylic vs. mineral: which is the better choice?<\/strong><\/h2>\n\n\n\n
Which acrylic finishes are available in the Viero Decoratives range?<\/strong><\/h2>\n\n\n\n
What decorative effects can be achieved?<\/strong><\/h2>\n\n\n\n
Can they be mixed?<\/strong><\/h2>\n\n\n\n
Can lime-based Viero Decoratives products be combined with acrylic products?<\/strong><\/h2>\n\n\n\n
Can acrylic-based finishes be applied to any substrate?<\/strong><\/h2>\n\n\n\n
What color range is available?<\/strong><\/h2>\n\n\n\n
Interested in acrylic wall products?<\/strong> Get in touch for more information.<\/h2>\n\n\n\n